richy plus

Olivetti Audit 513


5 comments so far...

David Mortensen February 05, 2010, 05:12 PM
Fantastic!
helen birch plus February 06, 2010, 12:11 AM
rather nifty looking retro piece
George Sideris May 01, 2012, 02:09 PM
I used to program these in 1970.
The 513 has a meaning
5=With Typewriter
1=Memory
3=number of Registers for calculations ie, 3 (this was the maximum).
The lever on the left, with numbers I,II,III,IV selects one of 4 separate programs. eg, I might be a Legder Application, while IV might be a Payroll Application. These machines could only ADD/SUBTRACT.
The machine was totally mechanical controlled by the Program "Bar" ata the rear of the unit. The Program Bar was a series of different length lugs at different heights which triggered the movement of the platen and what calculations or actions to take place - eg, A Date could be printed on a ledger card by selecting teh DT function in one of the Stops. There were 68 stops that could be used to create your program and when building an application bar with 4 different applications oftemn you spent hours and hours trying to save 1 stop so your program could fit. My co-programmer was John Almanzi and many a bet was made that we would find that elusive spare stop.
A quite noisy machine that clanked away and had to be moving its carriage for things to be calculated, printed etc
I was working for Olvetti in Castlereagh Street, Sydney at the time.
This machine was later replaced by the Olvetti P203, Olivetti P603
It also had a smaller brother called the 412 or 413 where the 4 meant it had no typewriter.
Salesmen at Olivetti at this time may recall the "Beastly System" which was a marketing design by Tom Kornhaber to promote these mechanical machines from 1970 to about 1972
graham December 01, 2012, 12:23 PM
I remember doing a course on this gadget way back in the late 70's at Haslemere training centre. It was a nightmare course that went on for about 12 weeks. I never really got the hang of them.
Awful contraption!!!
Terry Brooks May 29, 2014, 03:28 PM
I was on the first training course on these machines at Ivrea in 1960.
I programmed the first dozen or so of these machine installed in the Manchester area. Really loved the job.
Add a comment...
Your name:
Your e-mail:





About 23

About 23
What is 23 and who's behind the service?
Just In
Discover the world from a different angle.
Here's a crop of the latest photos from the around the world.
Search
Search photos from users using 23
Help / Discussion
Get help or share your ideas to make 23 better
23 Blog / 23 on Twitter
Messages and observations from Team 23
Terms of use
What can 23 be used for and what isn't allowed
More services from 23
We also help people use photo sharing in their professional lives
  • Basque (ES)
  • Bulgarian (BG)
  • Chinese (CN)
  • Chinese (TW)
  • Danish (DK)
  • Dutch (NL)
  • English (US)
  • French (FR)
  • Galician (ES)
  • German (DE)
  • Italian (IT)
  • Norwegian (NO)
  • Polish (PL)
  • Portuguese (PT)
  • Russian (RU)
  • Spanish (ES)
  • Swedish (SE)

Popular photos right now